ArubaOS 8.9 Series – Part 1 – Virtual Mobility Controller (VMC)

In this first video we are going to have a look on how to install and configure a standalone VMC on VMware ESXi running ArubaOS 8.9.0.0.

ArubaOS 8.9.00 VMC Installation Guide : https://www.arubanetworks.com/techdoc...

⏰Timestamps:
00:26 AOS 8 Terminology
01:03 VMC Models and Capacities
01:26 AOS8 without Mobility Conductor
01:47 Licenses
02:24 Interfaces on the VMC
02:44 Install a VMC on VMware ESXi
03:29 Settings on VMware
04:04 Power up the VMC
04:35 The initial setup of the VMC
06:19 Logging into the VMC with web browser
06:52 Adding the licenses
09:41 Adding the first access point, controller discovery
10:13 Add unapproved ap to VMC
11:22 Configure basic settings VMC and CPSec
12:05 Add VLANs
12:44 Enable firewall visibility and DPI
13:06 Configure two WLANs, employee & guest
15:12 Configure source interface RADIUS and add IP address to guest VLAN
15:59 Check that AP is up and clients are connected
16:22 Check the same in the CLI
17:08 Finish