Mobility Scooter Transaxle Teardown / Disassemble / Repair

Mobility Transaxle Scooter Teardown
Specifically Pride GoGo Ultra X and Elite. However, other mobility scooters use the same or similar transaxle.
0:00 Intro
0:28 New Transaxle
0:35 Wheel Bearing 626-ZZ
0:47 Wheel Bearing 6202-2RS
1:00 Tools needed
1:20 Removing the drive
1:48 Remove the handle and cover
2:48 Unbolt the power coupler
3:46 Unbolt the motor
4:56 Don’t lose the little two motor pieces
5:51 Unbolt the drive shaft from the chassis
7:00 Unbolt the transaxle
7:46 Pull it apart
8:21 Take a look
9:11 Motor drive shaft
9:39 Wheel bearing washer
10:05 Inside the gearbox and all the gears
10:35 Wheel bearing location
11:43 New Wheel bearing installed
11:53 Worn out gear
12:49 Put it back together and Install the motor drive
13:16 Install the transaxle. Single bolt first
14:06 Bolt the driveshaft back to the chassis
14:59 Install all the bolts to the transaxle
15:51 Install the motor. Small pieces first.
17:58 Install the power coupler
19:16 Testing
19:46 Install the handle and cover.
End.