Скачать или смотреть Self Adhesive Felt Install Instructions

-When installing self-adhesive felt, it is important to have a clean, flat surface area on the furniture legs for the best bond.
-Remove any old adhesive or small white chair caps from the legs for best result.
-Check the chair legs for a clean, flat surface area and remove any old adhesive or small white chair caps if present
-Remove any self-adhesive felt or any other material which could interfere with the proper adhesion to the furniture legs.
-Use rough sandpaper to expose the grain of the timber and give the surface a good sanding
-Use a damp cloth with a small amount of mentholated spirits or rubbing alcohol to remove dust and make the surface area clean
-Measure the diameter of the leg and select the corresponding felt
-Remove the backing paper from the adhesive side of the felt and place it on the leg.
-Press down firmly for about 5 seconds
-Repeat this process for all the legs
-Place the chair back on its legs and wait overnight for the adhesive to bond into the timber legs
-The more the surface area is covered by the adhesive, the better the result will be
-For best results, you want the adhesive bond overnight into the bottom of the chair leg before using
-The weight of the chair is left overnight to give the adhesive time to bond with the grain of the timber.
-The key principle for this installation is to have a nice clean flat surface area on the furniture legs