Heated Seats Installation

DIY Video on how to install heated seats in your car. The video also goes through the procedure for replacing the leather or cloth seat coverings.

Adding heated seats to your car will give you extra comfort on cold winter days, especially if the seats are leather trimmed.

A seat heater kit was bought from eBay that includes a two pads for each seat (total of four pads), one for the chair back and one for the seat cushion. A wiring harness with a relay, fuse and switch are included.

This video takes you through the process of removing the seat from your car, disassembling the seat cushions, removing the upholstery (leather or cloth), installing the heat pad, and then reinstalling the coverings. The chairs are then reinstalled into the car, where the consoles are taken apart and wiring to the fuse-box is demonstrated.

The use of hog rings are recommended to hold the upholstery and seat coverings together, however zip ties can be used in place.

The kit is universal and easy to use and requires little electronics knowledge, with the help of a fuse tap and eye-lit.

The pads are carbon fiber weaved within a cloth backing, and comes with double sided tape to be applied to the sponge. It can be cut in the middle (where the weaving is, but not the outside edges) and is roughly the size of an 11"x17" sheet of paper.

Link to Etsy shop where you can purchase speedkar99's brother's socks, t-shirts or hoodies:
https://www.etsy.com/ca/shop/Speedkar

Check out the speedkar99 Facebook page:
  / speedkar9  

Check out the speedkar99 Linkedin page:
  / speedkar99  

Follow speedkar9 on Instagram for behind the scenes coverage:
  / speedkar9  

Subscribe for more videos just like this:
https://www.youtube.com/subscription_...