Скачать или смотреть How to Telnet Configuration in Cisco Packet Tracer Remote Access to Router & Switch CCNA Lab Tut.

In this Video, I will show you "How to Configure TELNET in Cisco Packet Tracer " Please Like and Subscribe to my channel and press the bell icon to get notifications of new Tech videos.

**Step by Step process**

#Telen t
ktm-router
en conf t
int g0/0
ip add 10.0.0.1 255.0.0.0
no sh
npj-router
en conf t
int g0/0
ip add 10.0.0.2 255.0.0.0
no sh

TO ENABLE TELNET
npj-router

en
conf t
line vty 0 4 (which is max access limit 5)
password TELNET (TELNET IS PASSWORD)
enable password ADMIN197 (ADMIN197 is enable password)
Note: if you want to password encryption type
Router(config)# service password-encryption

Connect pc : ktm-router using console cable
type : telnet 10.0.0.2 (which is npj-router ip)
enter password : TELNET
en
enter password : ADMIN197
then you can access npj-router

Configure npj-router as you like
Disable telnet
click npj-router
open terminal
type : en
conf t
line vty 0 4 (chose range which you can set)
transport line ?
transport line none
end
wr

Then Reload CLI (PC0)
type : reload
telnet 10.0.0.2
show message : connection to 10.0.0.1 close by foreign host)

===Switch port Security===
   • How to configure switch port security usin...  


===Set router console password===
   • How to set password router console cisco p...  


===Recovery password router & switch ===
   • How to Recover Router & Switch Password in...  

#Laptop
#Computer
Computer Hardware
#Networking & Security
#Social Meadia Security
#Tech Tips and Tricks
#Mobile Setting and Tips and Tricks
#Device Security