Projection of Planes (Tamil) | Part 5 - Problem| Lecture 9.5 | Engineering Graphics|Hexagonal lamina

A plane is a two-dimensional object having length and breadth only. Its thickness is always neglected. Various shapes of plane figures are considered such as square, rectangle, circle, pentagon, hexagon, etc. The topic "Projection of Planes" in Engineering Graphics describes how different 2D views of a plane has been drawn in a drawing sheet. The plane is usually located in the first quadrant formed by the principal planes and followed the first angle projection.
There are four different positions of a plane as follows,
1. Perpendicular to both the planes
2. Perpendicular to one plane and Parallel to the other
3. Perpendicular to one plane and inclined to the other
4. Inclined to both the planes

Watch this part-5 Tamil video (Lecture 9.5) @SM EDUTALK that explains how to draw the projections of a hexagonal lamina when it is in the fourth position (Problem 5)
For more videos about Engineering Graphics in both Tamil & English,
Click the following link to enter into the Channel Page :
https://cutt.ly/smedutalk

Follow me on Instagram :
  / sm_edutalk  

Make me your friend on Facebook :
  / malligarjunan.s  

Projection of Planes (Tamil) | Part 4 - Problem | Lecture 9.4 | Engineering Graphics
   • Projection of Planes (Tamil)| Part 4 ...  

Projection of Planes (Tamil) | Part 3 - Problem | Lecture 9.3 | Engineering Graphics
   • Projection of Planes (Tamil) | Part 3...  

Projection of Planes (Tamil) | Part 2 - Problems | Lecture 9.2 | Engineering Graphics
   • Projection of Planes (Tamil) | Part 2...  

Projection of Planes (Tamil) | Part 1-Intro & Drawing procedure | Lecture 9.1 | Engineering Graphics
   • Projection of Planes (Tamil) | Part 1...  

Projection of Lines (Tamil) | Part 5 - Problems | Lecture 8.5 | Engineering Graphics
   • Projection of Lines (Tamil) | Part 5 ...  

Projection of Lines (Tamil) | Part 4 - Problems | Lecture 8.4 | Engineering Graphics
   • Projection of Lines (Tamil) | Part 4 ...  

Projection of Lines (Tamil) | Part 3 - Problems | Lecture 8.3 | Engineering Graphics
   • Projection of Lines (Tamil) | Part 3 ...  

Projection of Lines (Tamil) | Part 2 - Problems | Lecture 8.2 | Engineering Graphics
   • Projection of Lines (Tamil) | Part 2 ...  

Projection of Lines(Tamil) | Part 1-Introduction & Drawing procedure | Lecture 8.1| Engineering Graphics
   • Projection of Lines (Tamil) | Part 1-...  

Projection of Points (Tamil)| Part 2-Problems | Lecture 7 | Engineering Graphics |Dr.S.Malligarjunan
   • Projection of Points (Tamil)| Part 2-...  

Projection of Points(Tamil)|Part 1-Introduction & Drawing procedure| Lecture 6 |Engineering Graphics
   • Projection of Points(Tamil)|Part 1-In...  

Theory of Projection Part 1-Introduction(Tamil)| Lecture 4 |Engineering Graphics |Dr.S.Malligarjunan
   • Theory of Projection Part 1-Introduct...  

Orthographic Projection (Tamil) | Theory of Projection Part 2 | Lecture 5 | Engineering Graphics
   • Orthographic Projection (Tamil) | The...  

Dimensioning (Tamil) | Lecture 3 | Engineering Graphics | Principles | Methods | Dr.S.Malligarjunan
   • Dimensioning (Tamil) | Lecture 3 | En...  

Line Types & Suitable Pencils (Tamil) | Lecture 2 | Engineering Graphics | Dr.S.Malligarjunan
   • Line Types & Suitable Pencils (Tamil)...  

Frequently used terms | Engg. Graphics | Must watch video| Tamil medium students| Dr.S.Malligarjunan
   • Frequently used terms | Engg. Graphic...  

For more videos about Engineering Graphics in both Tamil & English,
Click the following link to enter into the Channel Page :
https://cutt.ly/smedutalk