How to Make a Jewelry Box on a CNC | ToolsToday

Making a small jewelry box (plans to make this yourself available below) on the Stepcraft M.1000 CNC machine using Amana Tool® industrial CNC router bits available on our website, https://www.toolstoday.com/?utm_sourc...

What do you think of how this CNC jewelry box project turned out?

The downloadable and customizable CNC plans are available on our website item no. JEWL_SM if you’d like to make for yourself!

https://www.toolstoday.com/small-wood...

With this design you will be able to make a very nice, tight fitting jewelry box with a personalized engraving inside! This is a small project, but there are a lot of toolpaths required to get the outcome we are looking for. In this set of plans I will walk you through finding the correct offset needed for your CNC machine to achieve a tight fitting box like this. The font used is mentioned in the plans so you can customize a date or add your own text. You can also size the box up or down depending on your needs as all the same principals would apply for a larger box.

Feed, Speed & CNC Running Parameters

Solid Carbide Spektra Extreme Tool Life Coated 30 Degree Engraving 0.005 Tip Width x 1/4 SHK x 2-1/4 Inch Long Signmaking Router Bit
https://www.toolstoday.com/v-14233-45...
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Chip Load Per Tooth: 0.005”

Amana Tool 46202-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit
toolstoday.com/v-13779-46202-k-bit.html
RPM: 18,000
Feed Rate: 180ipm
Plunge Rate: 90ipm
 
Links
** Subscribe -    / toolstoday  

** Shop the website - http://www.toolstoday.com

** Like at Facebook - http://tinyurl.com/toolstoday-facebook

** Follow on Instagram -   / toolstoday  

More Links 
 
Amana Tool® http://www.amanatool.com

STEPCRAFT M.1000 36 x 48 CNC Machine https://www.toolstoday.com/stepcraft-...

Vectric V-Carve Pro Software https://www.toolstoday.com/cnc-machin...

Walrus Oil Cutting Board Oil, 32oz
https://www.toolstoday.com/v-15096-wo...