Wire wrap pendant tutorial 'Poppy' by Kelly Jones.

Hello and welcome to my latest tutorial 'Poppy'.

To make this pendant you will need -
• 20g square wire, 4 x 8" (20cm)
• 20g half-round wire, 1 x 4" (10cm) 2 x 3" (7.5cm)
• 0.315mm weaving wire (28g) 200cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• Small oval cabochon, mine is 20mm by 12mm (you can use a different size, just remember to adjust wire length and weave repeats accordingly)

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

Facebook -   / kellyjjewellery  
IG - kellyjjewellery
My Etsy store - (where you can see my tutorials and jewellery for sale)
https://www.kellyjonesjewellery.etsy.com

Thanks for watching x