Скачать или смотреть FreeSpeak Edge Transceiver Standalone Mode

Standalone mode allows users to connect two FreeSpeak Edge beltpacks to a single FreeSpeak Edge transceiver to perform an initial site survey or demo.

Instructions:

1. Press and hold the mode button while simultaneously powering the FreeSpeak Edge transceiver. When the status LEDs turn yellow, release the mode button. The transceiver will then work through its startup sequence. When the device is ready, LED 1 is steady and LED 2 flashes yellow.
2.
3. Power on the beltpack.

4. You will see the transceiver to register to in the menu screen.

5. Select the transceiver and register to it using the D key. Use the C key to go back or cancel.

6. To take a transceiver out of standalone mode, power cycle the device.


Link to Channel Scan Video:    • FreeSpeak Edge Beltpack Channel Scan  

Visit our website for more product information, www.clearcom.com