DCS F-4E Shrikes in WRCS mode (outdated, see description)

The video is outdated, the pullup indicator lights and the distance on the HSI will now work without having to hold bomb release.

Original description:

Attempting to use Shrikes in WRCS mode.
Note that this might not be the correct procedure. I'm still figuring things out
Make sure you use the right Shrike sensor for your target radar.

Things I've learned since posting the video:
- Target altitude in feet needs to be set in the backseat WRCS altitude input, this is used to calculate distance to the aimpoint. It's very important against targets high in the mountains.
- When bomb release is held down the distance to the aimpoint calculated by WRCS can be seen on the HSI
- You don't need to pull up all the way until you get the circle cue, you can pull up any amount you wish (even none at all), eventually, as you get closer, it will still switch over to the circle and release the weapons once it deems it an acceptable solution.
- Pulling up further after the circle cue appears can cause the missiles to land short.
- The cues not coming on until you hold bomb release might be a bug. The manual specifies they should come on "when in range".