Скачать или смотреть Repair Complete Tormach 15L Slant Pro PN 32574 Control Board

When ever these come in I verify the MCU has not been damaged.. Best way to do a quick check is to read verify it and read it. Unboxing and Inspection    • Inspection of a Tormach 15L Slant Pro PN 3...  

U5 UNL2003

NO! that is not a solder bridge them 3 pins are connected and when the original chip burnt it took some mask out with it..

Tormach Supports the #RightToRepair.. Schematics/Firmware
https://github.com/tormach/Repair-Inf...

PIC 16F1947 ISP Connector For Xeltek 6100N using standard rainbow isp cable.
1 GRAY MCLR/VPP
2 Black VDD Target
3 White VSS (Ground)
4 Yellow PGD (ICSPDAT)
5 Brown PGC (ICSPCLK)
6 N/C

I have seen R06 was told to Update all R06 to R07 Tormach released R08 on their repo but gave no notes and I have not had anyone local willing to test it. I have Version R07 I my blog http://www.stevenrhine.com Tormach has not updated their git hub with it. So if anyone has tried R08 or if on that version let me know.

If you are a Xeltek Superpro 5000-6100N Owner this adapter is a Must Have.

Xeltek Superpro 6100N (Always Buy Form a USA Source Not China)
https://www.xeltek.com/manual-program...

You Can Get The Mega Magic Adapter From Александр "Alexander" On his Xeltek Telegram Group. Just ask how to buy in the chat and he will message you. https://t.me/+NKjL11OEQUhiNzMy

Yes, he is in Russia and mail is getting out to the USA.

My Xeltek Facebook Users Group It's a Small Group But Growing.
  / xeltek  

#tormach #cncmachine #repair