Tool Touch Off Without A Probe - Hurco CNC Training

In this training video, Justin Hartsock will show you how to touch off a tool on your Hurco CNC mill without a probe.

Instructions:
Note: the tool setup and touch-off procedures assume that the machine control has been setup in Absolute Tool Length mode.

Verify Active Device
1. Press INPUT on control panel
2. Select TOOL REVIEW softkey
3. Select TOOL SETUP softkey
4. Select MORE softkey
5. Select TOOL MEASURMENT SETTINGS softkey
6. Select the active Touch-off device

Calibrate the Tool
1. Jog the tool into contact with the
active touch-off device using the
hand-wheel
2. Store the tool length by pressing
the SET LENGTH softkey (F6)
*These instructions can also be found in our Machinist's Reference Guide

To see all of Hurco's CNC machines visit our website: https://www.hurco.com

Sign up for our CNC Machining Blog: https://hubs.ly/H0krP8D0

Hit the like button and share it.

Follow us on:
Facebook -   / hurcocompanies  
Instagram -   / hurcocompanies  
LinkedIn -   / hurc.  .
Twitter -   / hurcousa  

#tooltouchoff #hurco #tooling #cncmachine #cncmachinist #cncmill #hurcocnc #cncmill #howto #cnctraining