How to apply 1K enamel by spray gun

A quick how-to video demonstrating how to apply 1k enamel with a spray gun. We are using our Ultraspeed Enamel in this clip.

To apply 1k by spraying it will need thinning but only by around 5-10%.
Mix well and spray using around 40psi onto a test piece. Ideally use a nozzle size between a No 14 and 16. If the result looks uneven and ‘bitty’ then you have not quite thinned it enough. A side effect will probably be very little spray dust coming from the gun as well. To rectify add a little more thinner, mix well and try again.

We have guides on product application here - https://paintman.co.uk/help-and-info/

Products used:
Pastel Green Ultraspeed Enamel Paint: https://paintman.co.uk/shop/land-rove...
Green undercoat: https://paintman.co.uk/shop/choose-yo...
Prep Clean: https://paintman.co.uk/shop/prep-clea...
Thinners: https://paintman.co.uk/shop/thinners-...
Tack cloth: https://paintman.co.uk/shop/prep-clea...
Masking Paper: https://paintman.co.uk/shop/hand-mask...
Masking tape: https://paintman.co.uk/shop/masking-t...
Wet and Dry paper: https://paintman.co.uk/shop/wet-dry-p...
Scotch Brite pads: https://paintman.co.uk/shop/scotch-br...