Скачать или смотреть Luiton LT 298 CB Radio: Unboxing and Initial Setup - the Simple Guide How To Get On the Air

Find more:

🔍 CB Radio Car Kit: Luiton LT-298 Two-way Radio (Transceiver) And CB-Euro Mag Magnetic Antenna – Overview:
https://blog.promarket.info/blog/blog...

🛒 To buy this radio: https://market.promarket-eu.com/produ...

🤓 A variety of two-way Radios, Sets and accessories:
https://market.promarket-eu.com/produ...

👉 Also known under the names: Canva CB268, Optim 278, Manta CB02, Moonraker Major II, Nanfone CB268, PNI Escort HP-8000, PNI Escort HP-8024, Thunderpole T800 and many more.

🛠 Features:
Optimal dimensions and features for new and experienced users.
European and USA certificates: FCC / CE (RED); user manuals: IT, EN.
Multi-band / multi-channel operation 80 channels: UK, EU, d2, E1, -d, PL, -U, EC band channels.
*see also: Channel / Frequency grid Luiton,
*see also: article-FAQ on CB frequencies
RF gain knob; Automatic / manual squelch.

Characteristics:
12,8 +-2 Volt DC Input (12/24 volt for model 2022)
4 Watt RF Output
LED Channel Display
RX/TX Signal Meter
AM/FM Button
Channel 9 / 19
RF Gain knob (works on AM only)
Auto / Manual Squelch
Up/Down Microphone with Auto Squelch Key
Internal Speaker
Extension Speaker Socket
Size 115 (W) x 38 (H) x 150 (D) mm
Certified CE / RED.

Owner’s manual (installation and use) for CB Radio Luiton LT-298:
Manual_LT298_EN_wm.pdf
Manual_LT298_IT.pdf

🧾
Luiton LT-298 is a classic CB radio, clones of which can be found under different names.
However, we always prefer the original genuine model with fixed bugs and the widest functionality, without overpaying for a well-promoted brand.

The radio comes in a good-quality colorful package, which you can also present to someone.
Inside are rigid boxes that safely protect the electronics during transportation.

There are instructions in English and Italian, as well as a discount coupon for the next purchase on ProMarket.

The microphone has buttons for switching channels and a button for activating the automatic noise reduction.
Power cord with cigarette lighter plug.
Mounts for the microphone and the radio itself.

The transceiver itself is in the classic form factor.
At the bottom - the speaker and a reminder that this version is universal, for 12 - 24 volts DC.
At the back - the antenna socket UHF and external speaker socket.
On the front - professional microphone connector Micro-six and controls. All knobs, buttons, and toggle switches are analog.
The case is metal, and the assembly is neat.

Before connecting the power supply, be sure that a serviceable antenna and handset are connected and that the polarity and voltage of the power supply match. It is never superfluous to study the manual.

Right after switching on, the display briefly shows the country code (currently EC), then the channel number (currently 01).

To set the correct country code, turn off the radio, switch the channel selector switch to the "9" position, and turn it on again. Now you can change the country code with the channel switch button on the tangent. For most countries, EU (standard European grid, 40 channels) will do. More information about frequency grids and channels you can find in our blog (link in the description).

To save the selection, return the channel select switch to the "CH" position, turn off the radio, and turn it on again.

The "SQ" (squelch) knob is used to manually adjust the squelch, and the "RF Gain" knob is used to adjust the receiver sensitivity.

Use the "AM - FM" tumbler to set the desired modulation.

You can switch channels with the "Up" and "Down" buttons on the panel or on the handset.

Press the PTT button to check the transmission.
We check all the radios before sale to make sure that the power corresponds to the declared parameters in both operating modes.

Use the "RF Gain" (Radio frequency gain) knob to set the maximum gain of the radio signal.

Turn off the manual squelch by turning the "SQ" knob counterclockwise until noise appears and check the automatic squelch by turning it on with the "AQ" button on the microphone.

The indicator of the automatic squelch is a green LED on the panel.

For good reception, it is important to know how to set the manual squelch correctly.
To do this, you need to choose a moment of silence in the air, set the "SQ" knob to the minimum (the radio will be noisy) and smoothly rotate until the noise disappears and a little further. Depending on the level of interference and the channel, the setting may need to be repeated.

The radio is ready to work!

In the online store ProMarket you can buy at a good price radios, and ready-made sets with antennas.

We hope this video was useful. Put a like and subscribe to our channel to stay in touch and do not miss other reviews. Thank you.