Скачать или смотреть How To Install The Ultra Slim TV Mount For TV's Between 26" To 55" #17-515-001

https://www.showmecables.com/fixed-ul...

Hello and welcome to Show Me Cables. Today we’re going to show you how to install a TV mount.

This is the Fixed Ultra Slim TV wall mount bracket.

It is designed for TV’s between 26 and 55 inches and can support up to 99 pounds.

Included with the bracket is all the hardware you will need to complete installation.

As a quick overview on the hardware, the bracket includes various styles of mounting screws for different size TV thread patterns. Washers. Mounting Bolts. Plastic Spacers for TV’s with shallow screw holes. Concrete Anchors, if mounting into concrete or brick walls. And a small clip on bubble level.

The tools needed for this installation are: A pencil, a ratchet with a 10mm socket, a Philips head screwdriver, a drill with a ¼” drill bit, and a socket adapter if available, in which case you can use the drill instead of the ratchet. And a stud finder.

Before getting started, we need to check the VESA pattern of the TV

The VESA pattern is the distance between the screw holes on the back of your TV, which is measured in millimeters.

The measurements for our TV today is 400 millimeters tall and 400 millimeters wide. This means that the TV has a VESA pattern of 400 by 400.

Please make sure that your TV does not exceed the maximum VESA pattern supported by the bracket. Typically, you can find out the TV’s VESA pattern by checking the owner’s manual, but if that’s not the case or if that’s not an option for you, you can always break out the measuring tape and measure it yourself.

Start by attaching the arms onto the back of the TV and lining up the screwholes.

Insert a mounting screw into a washer and plastic spacer. Then hand tighten onto the arms. Finish tightening using the screwdriver. Repeat these steps for the other mounting arm.

Using a stud finder, locate and mark the stud you want to mount the bracket onto. Then locate and mark the next nearest stud.

Drill the first pilot hole.

Insert a washer onto a mounting bolt and hand tighten through the bracket. Finish tightening using the ratchet or drill.

Using the level, mark your stud for a second pilot hole.

Drill a second pilot hole. Insert another washer onto a mounting bolt and begin hand tightening. Finish tightening using the drill.

Repeat these steps for the remaining 2 mounting points.

Now we are ready to mount the TV onto the bracket.

Make sure the arms on the TV are able to catch onto the bracket. Then, using your screwdriver, tighten the locking screws from underneath the TV.

When complete, the Low profile mount should sit at only ¾” from the wall.

Congratulations, you have successfully installed the Fixed Ultra Slim TV Wall Mount Bracket.

If you still have any questions, you can call our customer service department at 888-519-9505.

For all of your home theater needs, choose Show Me Cables

Connect with Us Online:

  / showmecables  
  / showmecables   https://www.showmecables.com/blog