Trumen LMC-U2S CAPACITANCE LEVEL SWITCH WORKING AND CALIBRATION

1 - of DC or Neutral of AC Supply input
Supply:
15 to 80VDC or 15 to 260VAC 50/60Hz
2 Supply earth terminal for safety
3 Normally connected terminal of relay 1
4 Common terminal of relay 1
5 Normally open terminal of relay 1
6Normally connected terminal of relay 2
7 Common terminal of relay 2
8 Normally open terminal of relay 2
1- “5sec dly rly1” switch: This switch sets 5 second delay
for relay 1 output if set in ON position, else delay is close
to 1 sec for relay 1 in both (dry and wet positions) if this
is turned OFF.
2- “fs minimum-rly1” switch: Failsafe means alarm is same as
power failure.
Switch OFF: High (maximum) for overflow detection
(device will give alarm in covered condition)
Switch ON: Low (minimum) for underflow detection
(device will give alarm in uncovered condition)