Honey Bee (2010-2013) Instructional

Welcome to the instructional video for the Burley Honey Bee.
Out of the box the Honey Bee arrives in its folded position.
First remove the contents, and attach the wheels.
They will lock in and out of place using the push button in the middle.
Lock the aluminum frame into place, by reaching in through the back, grabbing the lower frame bar, and pulling it towards you.
Seat the upper frame bar on top of the plastic bumpers, and then lock the frame into place using the aluminum latches as shown.
Install the tow-bar by pressing it through the aluminum receivers, aligning the holes at the back of the receiver, and locking the tow-bar into place with the safety pin.
To install the wheel-guards. Press the provided bolts through the inside of the frame and secure it with the nut on the outside. Be sure to tighten these bolts securely with a 10mm wrench.
To convert from biking to strolling, loosen the wheel and lower it into place.
To adjust the handlebar, unlock it by pulling the lever, adjust the bar to the desired position, and lock it back in place.

INSTRUCTIONAL VIDEOS
Honeybee Instructions:    • Honey Bee (2010-2013) Instructional  
Attaching Trailer to Bike:    • Attaching Trailer to Bike -  Encore, ...  
Attaching Trailer to Bike:    • Attaching Burley Trailer to Bike  
Hitch Instructions:    • Hitch Instructions - How to Install B...