PCS-150 & 250 Powder Coating Systems - Why YOU NEED a Home Powder Coating System!

We have a few great options for powder coating here at Eastwood. In this video Joe goes over why the PCS 150 and 250 are GREAT options for home powder coating systems

PCS 150: https://www.eastwood.com/pcs150-hotco...

PCS 250: https://www.eastwood.com/pcs250-dual-...

PCS-250 Powder Coating Gun

The Eastwood PCS-250 Dual-Voltage HotCoat™ Powder Coating Gun gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. This new and improved gun features color-coded cabling, larger ground clamp, increased trigger room and a clear bottle so you can see the powder color and fluidizing action.

Advantages of Powder Coating

The PCS-250 Dual-Voltage HotCoat gun is one of the best powder coating guns on the market today. Why powder coat? Because it gives you one of the most economical, color-durable and longest-lasting finishes available. You'll find powder coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer.

Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections. One 8 oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy since you can simply sweep-up the over-sprayed powder. This powder can be reused as well if it's not contaminated. Eastwood powders contain no environmentally harmful solvents so you can be planet-conscious as well. HotCoat powder coating requires a 5-10 psi compressed air source and a dedicated electric oven (or toaster oven).

Powder Coat in Your Own Garage

Owning a dual-voltage electric powder coating gun means you can apply this technique to springs, valve covers, tri-flow radiators, vehicle body panels and anything else that needs a quality finish. One quick-change empty powder bottle is included and you can easily add more. The tool is designed to our exact specifications with a handheld activation switch, air inlet, removable diverter tip and grounding system.

New to powder coating? Our YouTube channel has a large playlist of powder coating videos that how to apply powder to different parts and what other equipment you might need. Our tech team is also available seven days a week by phone or email with free expert advice and solutions. Continue down this page for suggestions on accessories and safety equipment or visit our customer review section. Eastwood has a 100 percent customer satisfaction guarantee on every piece in the HotCoat powder coating system.

Features:

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical
Operates on standard 120v / 60Hz household current
Versatility with two settings for improved coverage
Low 15,000-volt setting
High 25,000-volt setting for multi-coat coverage over larger areas
Increased powder adhesion
Minimal overspray
Color-Coded cables for easy setup
More trigger-room for additional comfort
Larger ground clamp
Clear bottle allows you to see powder color, level and fluidizing action
Larger internal passages for improved powder flow
Refined power supply for more consistent coverage and powder-build
___________________________________________________________________________________________

For more information on Eastwood products visit www.eastwood.com or stay connected with the team via:
Facebook -   / eastwoodcompany  
Instagram -   / eastwoodco  
Blog - http://www.eastwood.com/blog

Eastwood has everything you need to do the job right when you're restoring a car, truck or motorcycle - from welders to paint and everything in between.