Another Inexpensive Chucking Option To Supplement Jam Chucks

https://www.AsWoodTurns.com

First, an addendum to the bouncy loops. Latex stretches more than I anticipated. I had to cut and re-glue to make several loops smaller. They need to be a tight fit. Check them with high speed rotation.

Meanwhile, in preparation for another project that I have not turned previously, I make pins that bolt directly to the chuck. My pins are 3/4" diameter. The bolt that fits my VicMarc is 6 mm diameter and 50 mm (about 2 inches) long. I also made another set 30 mm long (about 1.25 inches) just in case.

I think these will come in handy for many projects that require a jam chuck. We'll see.

Enjoy.

p.s. If you would like a more in depth demonstration, please contact me for an IRD (Zoom Demo) on this or other topics.

Blog: https://www.AsWoodTurns.com
FB:   / aswoodturns  
InstaGram: http://www.Instgram.com/as_wood_turns
Etsy: https://www.etsy.com/shop/AsWoodTurns...
Pinterest   / aswoodturns  

#jam_cHuck #chuck #woodturning #woodworking #wood-turning-projects #lathe #AlanStratton #video #DIY #Utah