Braun No Touch + Forehead Thermometer NTF3000 - Getting Started

Описание к видео Braun No Touch + Forehead Thermometer NTF3000 - Getting Started

For more information on Braun Thermometers, visit braunhealthcare.com. If you are having any trouble, please reach out to us at [email protected]. We are here to help! _________________________________________________________________________________________________
Braun No touch + forehead thermometer uses a new, revolutionary technology that ensures clinically accurate and consistent readings, with gentle convenience. This can be used with both touch and no touch functions.

Get started with only a few simple steps.
First, remove the protective cap from the thermometer. Then press the “Power/On” button to turn it on.

To help ensure a reliable measurement, hold the thermometer steady and make sure that any hair, dirt or sweat is removed from the forehead before taking a temperature. Once the forehead is clear, position the thermometer either directly on the patient’s forehead and between the eyebrows or up to 2 inches away from their forehead.

A built-in yellow guidance light will help guide your thermometer and ensure it’s in the correct position. Press the “Temperature” button to begin the measurement, which can be made in under 2 seconds.

Once a temperature has been taken, the reading will be shown on the thermometer’s display, along with a green, yellow or red color from the fever guidance system. The thermometer will also beep 10 times when it reads a temperature at or over 99.4 degrees. Using the no-touch temperature reading feature helps to avoid skin contact which can minimize the spread of germs.

When you’re finished using your thermometer, press the “Power” button again to turn it off or it will automatically power down after 60 seconds without use.

You can turn off any beeps or sounds from the thermometer by simply sliding the sound switch into silent mode.

To change the temperature scale of your thermometer between Fahrenheit and Celsius open the battery compartment and remove the batteries. Slide the temperature scale switch to your preferred temperature scale. Replace the batteries, close the compartment and your thermometer is ready to go.

Комментарии

Информация по комментариям в разработке