DIY Tesla Wall Charger 60 amp Install With a Full Breaker Box

Описание к видео DIY Tesla Wall Charger 60 amp Install With a Full Breaker Box

This is a comprehensive recap on how I installed my gen 3 Tesla Wall Charger and how I got around the common issue of having a full load center / breaker box.

Below is a list of all the supplies and tools I used to get this job done.

If you have any questions, drop a comment on the video and I will try to get back to you ASAP.

If you haven’t yet ordered your Tesla, consider using my referral code when you do, it will land you $250 off your purchase price and a 3 month trial of the Full Self Driving beta.

Tesla Referral Link: https://ts.la/nicholas809820

Supplies PDF: https://drive.google.com/file/d/1THyg...

Conductors and ground

6 AWG(gauge) THHN wire - Rated up to 75 amps

Measure out the path you plan on taking from your charger to the load center and add like 10 feet or so for any margin of error .

Ground - You’ll need one ground wire the length of the run you measured.

You should get GREEN colored wire for the ground - https://www.homedepot.com/p/Cerrowire...

Conductors (hot) - Double the run measurement for the 2 hot wires as you will need 2 the length you measured.

You should get RED or BLACK colored wire for the 2 conductors -

https://www.homedepot.com/p/Cerrowire...

If not red/black - wrap red tape around ends

Red tape - https://amzn.to/49dZia5

PVC conduit - the 3⁄4 PVC conduit comes in 10 foot lengths.

Divide your measurement by 10 and get 1 extra if you have a remainder.
https://www.homedepot.com/p/3-4-in-x-...

PVC fittings - map out the conduit path on paper and try to figure out how many different kinds of fittings you’ll need

90 degree 3⁄4 in elbows -
https://www.homedepot.com/p/Carlon-3-...

3⁄4 in Female coupler -
one end of the conduit and the elbows is flared/belled so that you can just connect another piece of PVC into, but as you cut them down you might need these connectors to connect non-flaired pieces https://www.homedepot.com/p/1-1-4-in-...

3⁄4 in female to threaded male connector -
This is the piece that will go in the top or bottom of the charger mounting bracket
https://www.homedepot.com/p/Carlon-3-...

3⁄4 in Conduit body -
https://www.homedepot.com/p/Carlon-3-...

Flexible 3⁄4 in conduit - https://www.homedepot.com/p/Carlon-3-...

PVC conduit cement - https://www.homedepot.com/p/Oatey-8-o...

3⁄4 in electric lock nut-
https://www.homedepot.com/p/Halex-3-4...


Circuit Breakers -THESE ARE ONLY RELEVANT IF YOU HAVE A SIEMENS LOAD CENTER

Siemens 60 amp 240v breaker -
https://amzn.to/479kYSZ

Tandem 15 amp breaker (plug on neutral) -
https://amzn.to/49aam8n

Tandem 15 amp breaker(pigtail neutral) -
https://amzn.to/3SfhTwr

Required Tools- all these tools are required, below are what I have and/or suggestions, but
any version of them will do.

Drill and/or driver. -
https://www.homedepot.com/p/Milwaukee...

5/32 drill bit / SQ2 bit
If you need the square and 5/32 drill bit, might as well get a set like this Milwaukee set - https://www.homedepot.com/p/Milwaukee...

Bit screwdriver you can use the SQ2 bit and kit supplied 4mm hex ball bit with -
https://amzn.to/3tQTpzD

5/16 in blade flat head screwdriver (if your 60 amp breaker terminal screws are flathead rather than SQ2)
https://amzn.to/47ce8ML

Torpedo level -
https://amzn.to/46N0PlP

Pliers/wire cutter/strippers -
https://amzn.to/3tRz6Sz

A utility knife (box cutter) -
https://www.homedepot.com/p/Milwaukee...

Stud finder -
https://amzn.to/3FBact1

Electrical tape -
https://amzn.to/49dZia5

Nice to haves -

Contactless voltage tester-
https://amzn.to/3ShfFg4

3⁄4 in Electric lock nut wrench -
https://amzn.to/3FD2Yoy

PVC pipe cutter -
https://amzn.to/471hPow

Oscillating saw (cut out drywall)-
https://amzn.to/3Sdg5UQ

Insulated screwdrivers -
https://amzn.to/3SifocY

Torque wrench or torque screwdriver (50 in/lbs) -
https://amzn.to/3SivOCb

Torque Screwdriver -
https://amzn.to/3tTRYR2

00:00 - Intro
02:28 - What you'll need
07:59- Get around having a full load center
13:39 - Mount back plate
16:26 - Conduit
20:33 - Wire charger
23:53 - Mount charger
33:16 - Wire breaker box
42:44 - Recap
46:11 - Wi-Fi
48:37 - Outro

Комментарии

Информация по комментариям в разработке