Скачать или смотреть Helioption Gimbal swash review for trex 550, 600, 700

ditching the video glasses for all future reviews and instructional vids! The first part of this review was not in view so here are the details of the first impressions.
Lighter by 14q vs OEM DFC swash, Ultra smooth movements as swash has 4 fanged bearings for the X and Y axis pivots. Greater range of travel allowing for more servo throw without binding. NOTE: you MUST disassemble the swash and use thread lock on all screws and balls. Also use CA on the 4 flange bearings to keep them in place. *IMPORTANT* this swash sits apx .5mm lower than the OEM swash so double check your pitch at center and adjust mechanically if needed. **UPDATE ON THE TURNBUCKLES** Until this product is revised I would not recommend using them on your goblins. The plastic links fit too loosely and pop off with little effort. This makes adjusting them with them attached to the balls impossible and most importantly makes the model unsafe to fly. I have email Helioption about this issue and hopefully they will revise the links in the future. If you would like to use the turnbuckle you can. Just drill out the OEM links to fit the threads on the turnbuckle and youre done!
Thank you Kim from Helioption and Xtreme production for the opportunity to review these top quality products!
You can check out their full product line of upgrades at www.helioption.com or www.xtreme-production.com