Easy Ski-Doo E-tec Engine Summerization Procedure. Getting a snowmobile ready for summer

Visit Montrose Implement & Motorsports website: http://www.montroseimplement.com

Subscribe to YouTube Channel: https://www.youtube.com/user/Montrose...

Visit Facebook Page:  / montrose-implement-motorsports-211804984320  

Engine Storage Mode (E-TEC)
Like other engines, the E-TEC has to be properly
lubricated at storage for internal parts protection.
The E-TEC system offers a built-in engine storage
lubrication function (summerization) that can be
initiated by the operator.
To engage procedure, do the following:
1. Place the vehicle in a well ventilated area.
2. Start the engine and let it run at idle speed until
it reaches its operating temperature (watch the
coolant temperature on the display or verify that
the rear heat exchanger becomes warm).
3. Push the SET (S) button to select odometer
mode.
4. Repeatedly depress the HI/LOW beam switch
rapidly, then, while doing this, press and hold
the SET button until PUSH S appears on the
display.
5. Release all buttons when gauge displays PUSH
“S” appears.
6. Again, press and hold the SET (S) button for 2 -
3 seconds.
NOTE: The gauge will display OIL when the storage
procedure is initiated.
7. When gauge displays OIL, release button and
wait for the lubrication function to end.
Do not touch anything during engine lubrication
cycle.