Скачать или смотреть Cheapest Flight Controller| No PCB Needed |ESP32 + Betaflight + Phone Receiver

In this video, I show you how to use an ESP32 as a cheap DIY Flight Controller without the need for a PCB! 🚀
It’s built on a breadboard with sensors (Gyro, Accelerometer, Compass, Pressure/Altitude), runs Betaflight, and even uses a smartphone as a receiver via another ESP32 — making it one of the cheapest drone flight controllers you can build.

With support for both BLDC and brushed motors, this setup opens up a lot of possibilities for DIY drone enthusiasts.

🧑‍💻 Useful Codes
For Flashing

pip install esptool

esptool.py --chip esp32 --port COM6 --baud 460800 write_flash -z 0x0 firmware_0x00.bin
----------------------------
Debugging Code

pip install pyserial

python -m serial.tools.miniterm COM6 115200

🔗 Useful Links & Resources:

📌 ESC Calibration with ESP32 + Wiring Guide:
👉    • Can You Repurpose a Cheap Drone FlY Contro...  

📌 ESP-IDF (development framework):
👉 https://dl.espressif.com/dl/esp-idf/?...

📌 ESP Drone Flight Controller Firmware:
👉 https://github.com/rtlopez/esp-fc

📌 iBUS Wi-Fi Controller (ESP32 to iBUS Translator):
👉 https://github.com/Boyyt357/ESP32-WiF...

💡 If you enjoy DIY drone and robotics projects, don’t forget to Like, Share, and Subscribe for more engineering builds!

#FlightController #ESP32 #Betaflight #DIYDrone #CheapestFC #NoPCBDIY #MPU6050 #Quadcopter #PhoneControl #UDPJoystick #BrushlessMotor #Arduino #DroneHacks #PIDTuning #Sbus