Custom Pegboard for your Tool Wall

I made a Tool Wall with a custom Pegboard for my Creative Maker Space. The tools are easily accessible and they look very good, which is not unimportant, as this room still needs to function as a living room. Plus you can change and adjust the arrangement in the future, which I will definitely do.
I could use a leftover 6 mm birch plywood piece from an old furniture project. The only problem is, that it had no holes. So I had to drill them (16*29 = 464 in total). They are 50 mm apart and 6 mm in diameter. I double the distance from the standard 1 inch (=25,4 mm), as this would be too much and completely unnecessary.
Luckily, I took all the tool holders from my old shop with me, so I could reuse them. Some of them are not quite suited for such a small wall, so I probably going to replace them in the near future.

For more details check the Blog Post: https://philip-becker.de/2021/03/17/d...

If you’d like to support my work and help me create future projects and videos, you can leave me a tip here: https://ko-fi.com/mrphilipbecker

Chapters:
0:00 Intro
0:46 Drilling all the Holes
2:53 Attaching it to the Wall
5:52 Painting
7:23 Beauty Shots
7:54 More Information
9:14 Outro

#pegboard #makerspace #doityourself

My Links:
Website: https://www.philip-becker.de
Instagram:   / mrphilipbecker  
Facebook:   / mrphilipbecker  

Music:
RAGE - Down Time In My Soul
Bad Snacks - A Caring Friend