JRZ Full Install on a Gen 2 Raptor

Tools needed for JRZ Install

Ratchet(s) for the various Sockets listed

Jack

Jack Stands (a lift would be preferred)

Tire Iron

Sledge Hammer

Pry Bar

Ratchet Strap

Flat head Screwdriver

Knife

Flashlight

Ball Joint Nut:
10mm Socket
18mm Wrench

Lower Front Shock Nut & Bolt:
30mm Deep Socket or Closed End Wrench (Nut)
27mm Socket (Bolt)

Front Shock Upper Nuts/Bolts:
18mm & 15mm Wrench
18mm & 15mm Deep Socket
6” or longer Extension for Ratchet
Swivel Attachment for Ratchet

Rear Shock Bolts (Top and Bottom):
15mm Socket

Rear Shock Nuts (Top and Bottom):
18mm Wrench or Deep Socket




Torque Specifications

Rear Shock Bolts (Top & Bottom) 90 lb-ft

Lower Front Shock Bolt 406 lb-ft

Ball joint nut 85 lb-ft

Upper Front Shock Bolts 40 lb-ft



For more information on JRZs Visit:
https://www.olsenmotorsports.net/?wpa...

For more information on Bushmaster Productions Visit:
https://www.BushmasterProductions.com

For Torque Specs and other useful Raptor information Visit:
https://www.freedommotorsports.us/c-1...