Скачать или смотреть How to create an interface using LabVIEW for the temperature PID control circuit in Proteus? Part-2

Continuing the previous video, if in the video the LabView interface is only for displaying setpoint graphs and PID control results, then in this second part, some control objects are added which can be used to set setpoint, kp, ki and kd values in addition to setting the PID control of the circuit in Proteus.
Here are the steps:
1. Create a temperature PID control circuit in Proteus.
2. Write an Arduino program using the PID_v2 library.
3. Configure the ATmega328 component in Proteus.
4. Configure the COMPIM component in Proteus.
5. Develop a LabVIEW program.
6. Set the COM port in LabVIEW to the virtual COM pair with COMPIM.
7. Run both Proteus and LabVIEW.
For more detailed information, see the following link: 5menitbelajarlabview.blogspot.com

Isolated by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/...
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/