Chevy S10 Built 4.3L/4.4L Vortec/Cammed 270HR 270/.535 110LSA/106CL/TBI to Carburetor Swap

Описание к видео Chevy S10 Built 4.3L/4.4L Vortec/Cammed 270HR 270/.535 110LSA/106CL/TBI to Carburetor Swap

Just got my built 4.3L/4.4L running on September 1st. Motor is bored .060 over making it a 270ci 4.4L. Still working out some kinks but sounds nice.

Update ~ This video its running TBI to Carb Conversion
Quick Fuel Brawler 600CFM ~ BR-67270,
Mr. Gasket Fuel Pressure Regulator ~ Part# 2015,
Mr. Gasket Fuel Pressure Gauge ~ Part# 1561,
Summit Racing Fuel Pressure Gauge Fitting ~ Part# SUM-G1710C,
Spectre fittings ~ Part# 5945 x 1 & 5946 x 2,
2ft of 50psi 3/8 Fuel Line
1ft of 5/16 Fuel Line for the return.
eBay Dragon Fire Billet Distributor and 65k Coil,
Even with the burnt chip this old OBD1 ECU doesn't like this cam. I tied the fuel pump wire (Purple & Grey I Believe) to the Tach Wire. And I used one of the Injector hot wires for the Electric Choke. Thanks for watching!

Here is a list with some of the parts I used.

Camshaft ~ Comp Cams K09-420-8 215/215 @ 50, 270/270 adv dur. .500/.500 Lift .535/.535 with the 1.6 Ratio Roller Rockers.
Roller Rocker & Pushrod Kit ~ Comp Cams 1.6 Ratio RP1418-12
Timing Chain ~ Comp Cams CCA-3100 Double Roller
Pistons ~ Speed Pro L2256F 60
Head Gaskets ~ Cometic C5739-051 to my knowledge compression should be around 9.8:1.
Heads ~ eBay Seller J&C Enterprises Stock Reman Vortec Heads w/ LS6 Blue Beehive Springs .570 Lift / 3/8 ARP Rocker Studs
Head Studs ~ ARP-134-2002
Spring Retainers ~ Comp Cams 787-12
Intake ~ Edlebrock 2114
Intake Bolts ~ ARP-233-4001
Intake Gaskets Fel-Pro SFLMS958171
Mufflers ~ Summit Racing SUM-638222
X-Pipe ~ JEX-SXP4
Headers ~ Headmen 69400 Long Tubes. Passenger side needed the floor board to be cut and patched for the headers to fall into place. And they were painted with BBQ Pit paint natural aluminum.
Convertor ~ Ohio Performance Transmissions Transtar GM31CW 1800 Stall. (They sent me the wrong convertor. I ordered the 22-2500 stall and didn't realize it was wrong till I put it in. If you order from this seller beware and check your part numbers before installing.)

Комментарии

Информация по комментариям в разработке