Скачать или смотреть How to setup Tiandy IP Cameras with Different IP Address in Tiandy NVR | 2024

How to setup Tiandy IP Cameras with Different IP Address in Tiandy NVR |
Here’s how you can set up Tiandy IP cameras with different IP addresses on a Tiandy NVR:

Connect the Cameras to the Network:

Ensure that each Tiandy IP camera is physically connected to the network, either via Ethernet cables (for wired connections) or through Wi-Fi (if applicable).
Make sure the cameras and NVR are on the same local network.
Assign Unique IP Addresses to Each Camera:

Access the camera's web interface by typing its default IP address into a browser.
Log in using the camera’s credentials (default ones can typically be found in the camera's manual or label).
In the camera settings, navigate to the “Network” or “IP Configuration” section.
Assign a unique IP address to each camera. You can either set the camera to a static IP address or use DHCP if you prefer the router to assign IPs automatically.
Configure the NVR to Recognize the Cameras:

Log in to the Tiandy NVR's web interface or use the NVR's local screen interface.
Go to the "Camera" or "Device" section in the settings.
Click on “Add Camera” or “Add IP Camera,” and enter the unique IP address of each camera, along with its username and password.
Repeat this for each camera, ensuring all unique IP addresses are correctly entered.
Verify Camera Connection:

Once added, check the NVR interface to ensure that each camera is online and displaying video feed properly.
Adjust camera settings such as resolution, frame rate, and other preferences for each IP camera if needed.
Save and Finalize Setup:

Once all cameras are connected, save the settings.
Test the system by viewing the live feeds from all cameras to confirm everything is working properly.
Feel free to ask if you need further assistance with any of the steps!
For more information
www.nstech.com.np
call: +977-9855050640
#cctv #tiandy #tiandy ipc #wifi #wificamera #cctvcameramarket #homesecurity #homesurveillance