How to Remove a NuTone IM3204 Radio Intercom Master Station

In this Video I show you how to: Open Up - Disconnect - and Remove a NuTone IM3204 Radio Intercom Master Station

I show you different tips and techniques on marking the different wires as you disconnect them, so it will be easier to re-install the IM3204 after it has been repaired.

Disconnecting the IM3204 inlcudes:

1. Disconnecting the wiring from the Remote Intercom Stations

2. Disconnecting the entry Door Station wiring

3. Disconnecting the wires from the optional Chime Module

4. Disconnecting the Ground Wire from the Wall Housing

5. Disconnecting the wires from the NuTone 105T Low-Voltage Transformer

6. Disconnecting the AM - FM Radio Antenna

For a first timer, this should should take your between 15 - 30 minutes to complete, then your IM3204 can be removed from the wall-housing

For more detailed information about NuTone Intercom Systems:

You Can:

Visit our web site: http://northsideforyourhome.squarespa...

Or you can email use at: nscompany@msn.com

Or you can call us at: 925-743-8236