How To Fix Sharp TV Stuck on Sharp Logo Screen || Sharp TV Wont Turn On After firmware Update

[FIX] Sharp smart TV Stuck on Sharp Screen. Went to update the firmware on the Sharp LC-65LE645U and the TV froze for an hour. Ended up unplugging it and replugging it in and it only showed the Sharp screen. So I tried to do the whole factory reset and held the input and volume down buttons at the same time and plugged the TV in, but instead of getting the little K on the screen I got the Sharp logo.

So I found another Sharp TV that had the same specs and everything and the model was similar. It was the Sharp LC-65LE654U model. I downloaded the firmware on the computer and extracted the zip file using 7zip (you can also use WinRar) and changed the name to "install.img" (no quotation marks). I then formatted the flash drive on my computer to FAT32 and copied the file over. I unplugged the TV and inserted the flash drive into the USB slot on the side of the TV and plugged the TV in. The firmware started to install and the TV is working again.

#sharpTvStuckOnLogoScreen
-----------------------------------------------------------------------------------------------
Fair Use Disclaimer:

This channel may use some copyrighted materials without the specific authorization of the owner but the contents used here falls under the “Fair Use”
Copyright Disclaimer under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.