👨🏻‍🔧Another Day at the Junkyard: REBUILT 4L60E FOUND?!?

💥🥩 https://www.A1JERKY.COM 🥩💥
GOURMET BEEF JERKY AVAILABLE SOON!

••
Music By:Energetic Rock | Hiking Free Music by Alex-Productions & Efficsounds

🤩Thanks for stopping by and watching!🤩
👨🏻‍🔧🧰🔧
For professional inquiries:
⬇️

Email:
[email protected]

🎥Filmed by: JunkManA
All Rights Reserved
and Protected Against Unauthorized Use.
🔧TOOLS USED 4 MOST 4L60E REMOVALS🔧

Always bring:

A good hammer, short and long flat head screw driver, rags, gloves, a good pry bar, good pliers and don’t forget your water!

Drive Shafts Removal: (Front & Rear)
11mm Wrench
3/8” to 1/4” adapter
1/4” 3inch extension
3/8” impact
12inch prybar

Crossbars/Subframes

18MM 1/2” shallow socket
18MM Wrench

21MM 1/2” long socket
21MM Wrench

(If 4x4 for transfer case)
15MM Ratcheting Wrench
15MM 1/2” Shallow Socket
1/2” ratchet
1/2” swivel joint socket
(Recommended using a electric ratchet to cut removal time by up to 90%)

Actual transmission:
13MM 1/2” Deep Socket
14MM 1/2” Deep Socket
15MM 1/2” Deep Socket
1/2” 12inch Extension
1/2” swivel joint socket
Wire cutters (the longer the better)
90° mechanic pick to loosen oil line E-clips

Torque converter:

1/2” 12inch extension
15MM Shallow Socket
15MM Ratcheting Wrench
3/8” Ratchet
3/8” 15MM shallow socket
3/8” 3inch extension
(Recommended using a electric ratchet to cut removal time by up to 90%)

**KEEP IN MIND THESE ARE THE BASIC TOOLS TO HAVE IN YOUR BAG FOR THE “PERFECT SCENARIO”**

I WOULD TAKE EXTRA TOOLS LIKE 12MM, 16MM, 17MM SHORT AND SHALLOW 1/2” & 3/8” SOCKETS and an adjustable wrench just in case!!

Hope this helps!






Junkyards are fun but can be very dangerous, STAY ALERT AT ALL TIMES!!

Thanks for watching!

COMMENT, LIKE & SUBSCRIBE FOR MORE JUNKY VIDEOS!

Thanks!

-JunkManA👨🏻‍🔧