Скачать или смотреть How To Fit Acoustic Panels - Liquid Construction Adhesive / Liquid Nail - Glue Instructions Guide

Welcome to acoustic treatment UK.

Today we’re going to be showing you how to attach your acoustic panels to the wall using liquid nails. What you will need.

You will need a strong liquid nail, preferably new and unopened and a
spirit level.

First, place your acoustic panel on a worktop and put a small amount of
liquid nail in 3 rows of 3 around what will be the back of your panel.
Ensure your liquid nail is not too close to the edges, around 10mm in
from each edge will be ideal.

Next, place your acoustic panel in its desired position on your wall. As
soon as you have decided where the panel will be going, make sure you
use your spirit level to ensure your panel is level. Do not wait until the
panel is placed before you locate your spirit level as the liquid nail will set
quite quickly. Put pressure on your panel to ensure the liquid nail is
flattened and does not result in your panel protruding from the wall as
this will cause a gap once the liquid nail has set.

After you have installed the first panel, place the second panel directly
next to it. Please ensure there is no gap between them, a small error of a
couple of millimetres could cause the panels further up to be out drastically. Once installed, you will be unable to reposition these panels individually so ensuring they are all straight with the spirit meter is of upmost importance. Put pressure on the second panel and flatten again, repeating the process with as many of our acoustic panels as you have acquired.

For quotes, more advice and our FAQ’s please visit www.acoustictreatmentuk.co.uk