Скачать или смотреть Micro-NX Implant Unit

IMPLANT UNIT (IMPLA-NX LED)
The Impla-NX is a compact, stylish & equipped with powerful optic motor. Real time speed & torque performance exhibited on LCD.
Includes:
1. Motor
2. Handpiece
3. Controller
4. Foot Pedal
Product features:
1. Max. 80N.cm (32:1 gear handpiece)
2. Torque limit function (the beep sounds when load torque above torque value set by user operates longer than 3 seconds & the operation stops to ensure patient’s safety)
3. Powerful optic motor (it shows LED functioning within motor during the motor operation)
4. Real-time torque & RPM display (the compact control unit shows real time RPM & torque through digital panel. It helps users to perform a surgery more precisely.
5. Program modes (program button enables users to select 6 modes in turns – drilling, tapping, remove tap, implant, remove & lock screw. Users can select them for each purpose.
6. Memory function (users can safe 9 personal settings using memory button, which makes it possible to load the different settings immediately in terms of program mode, RPM, torque, coolant, speed, gear ratio & turn direction.
7. Auto calibration function (calibration function operates by simultaneously pressing +/- button for 2-3 seconds. Perform the calibration function when the motor is initially used & operate this function under no load status.
8. Sterilizable & reusable irrigation tube (multi-use tubing that can be reused for at least 30 times – with rust-proof cutting edge material)
9. Thread cutting function (thread cutting is available in tapping mode among 6 basic programs)
10. Thread cutting? (the thread cutter function supports the surgery when makes tap for implants in to dense “D1” bone)
Specifications
Motor:
1. Max. Speed: 40 000RPM
2. Max. Torque: 80N.cm (32:1)
3. Internal Resistance: 730mΩ
4. Internal Inductance: 100uH
5. Dimensions: 24mm(W) x 100mm(L)
6. Weight: 156g
7. Optic: Yes
Handpiece:
1. Ratio: 20:1
2. Max. Speed: 2 000RPM
3. Max. Torque: 70N.cm
4. Size: 20mm(ɸ) x 95mm(L)
5. Weight: 73g
6. Material: Stainless steel
7. Irrigation: External
8. Coolant Volume: ≥50ml/min
9. Optic: Fiber optic
10. Bur: CA bur (ɸ2.35)
11. Chuck Type: Push button
Controller:
1. Power Supply: AC110-240V
2. Frequency: 50/60Hz
3. Power Consumption: 150VA
4. Max. Flow Rate: 130ml/min
5. Fuse: 2 x 250V – T2.0AH
6. Dimension: 285mm(L) x 250mm(W) x 120mm(H)
Foot Pedal:
1. Speed Control: Variable
2. Function: Program, coolant & clockwise/counter clockwise