My Personal Criteria For Scroll Saw Blade Selection

Blade and drill bit info links
https://www.bearwood.com/scroll-saw-b...
https://www.bearwood.com/drill-bits.html
https://mikesworkshop.com/collections...
Extended length drill bits
https://www.mcmaster.com/products/dri...

Here are links to the book and the tools that I have purchased.
Link to book:
https://amzn.to/48D0NxB

Flex pad sander and discs:
https://amzn.to/3S7sadV

Sanding sleeves for inflatable sander:
https://amzn.to/4aLRsFo

Inflatable sander:
https://amzn.to/3S3FmQT

Affiliate links to the things I use in the lay out of my spinners
compass (not the same as mine as it is not available anymore, but I like this one)
https://amzn.to/3LVcYNl
30 60 90 ruler
https://amzn.to/46JFyct
45 45 90 ruler
https://amzn.to/3PStOxq
swivel hooks
https://amzn.to/3Qduf77
https://amzn.to/3FRIAQE


Some of my favorite pattern books
classic fretwork patterns
https://amzn.to/3PT7fsJ
custom boxes
https://amzn.to/3ROJt3B
gear clocks
https://amzn.to/45rXxDl
gizmos and gadgets
https://amzn.to/3FnoBJ5
scroll saw box patterns
https://amzn.to/44sYQTt
more box projects
https://amzn.to/3WARb3E
In this video I try to explain how I chose a blade for any given cut. First I look at the size of the waste area and how intricate the cut is. The smaller and more detailed the cut the smaller the blade I use. For very fine fretwork I will use a 1 or 3. But 80 percent of my cuts are made with a 5 with a 3 or 7 for most other cuts. Other factors that determine blade size and type is thickness of the wood and density such as oak vs pine. The thicker the material and the more dense the material usually calls for a larger blade.

https://www.izzyswan.com/Store/Pop-up...
His video is here
   • (how to make) a pop-up band saw pen b...  


link to barrel hinges
https://amzn.to/3M0R7nc

https://amzn.to/3Vd3hPs
https://amzn.to/4avZYHj
https://amzn.to/4auu0LG