Скачать или смотреть etrailer | A Closer Look at the Ark Locking Jerry Can Holder with Siphon Guard

Click for more info and reviews of this Ark Roof Rack:
https://www.etrailer.com/Accessories-...
Check out some similar Roof Rack options:
https://www.etrailer.com/dept-pg-Acce...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-review-ar...
What's up everybody, It's AJ with etrailer.com. Today we're going to be checking out this jerry can holder from Ark. We've got it mounted to our trailer here today, and you can mount it too from the base or on the sides. It comes with a lock and a strap to keep it in there nice and tight. You can see, you can shake the whole trailer back and forth this way, it's not going anywhere. Let's check it out.

Right away, I just want to show you what set this apart from some of the other jerry can holders I've worked with. This one's going to have a padlock that comes with it, a hole to put that so you can't take this bar out, so it's nice and secure in there, and a siphon plate so this just goes right over where the cap is. So yeah, you can remove this cap, but you can't pull out the siphon hose from there. So that means nobody can pull that out and take your gas and put another hose in. It's just not going to work that way with that plate in the way.

In addition to this bar on top, we also have a strap that comes with it and that's going to hold the can down nice and tight there. You can always tighten it back up with the buckle right here. It can be moved, pull a little bit tighter, push that back over, and that's just further security of keeping that gas can in place. You also have down here on these bars, you have rubber pads- so that's going to keep the rattling down. So as you move down the road on your trailer, it's not going to be shaking like this.

And even if I do shake the can back and forth, I'm going to stop talking here in a second, You're going to hear that it doesn't rattle. You're going to hear a little bit, but it's an empty hollow can at this point, So it's going to make a little bit of noise, but that's going to keep it from just banging back and forth while you're driving. I think it's going to be really useful to one- hold your gas can place. I like that, that it has a designated spot on your trailer. I mean, it's going to be good for landscaping trailers too.

I know when I mowed grass for a few summers, it was nothing worse than having the gas cans in the wrong spot on the trailer when you go to pull the lawnmower up, then you have to pull it back down, and get out and move the gas can out of the way. This way you can just put it right in its place, leave it here, it's out of the way, and you can organize the trailer and rest around it. Today we're storing a five gallon NATO style gas can in there, and there's three points of adjustment with this bar on top, so we can go a little bit less or a little bit more than that. I'll pull this out and show you. There's the holes that you can adjust to line up here to lock it up. Let's get some measurements on the inside, just so you can specifically see if your gas can is going to work or not. So we're going to go on the inside, and go from pad to pad, because the pad sticks out a little bit more than the base does, so go there to there. It's going to be 13 and three quarters there. And then we go depth- same thing with those pads- that's going to be about seven inches right there, so that's how much space you're working with there at the base. Some more measurements- we're going to measure the height here. It's going to go from the base here to the bottom of our siphon plate. It's going to be 18 and seven eighths, and then let's just go ahead and get our measurement from the pad at the bottom to the bar here. That's going to be about 19 and a half. So again, this is in the highest position with it working with a gas can. The reason we gave you those measurements is just because in its highest position, if you have a gas can that is smaller than that, it should work just fine with this set up. Now there are- in fixed positions here, so if you get to a point your gas can is in-between any of those, and you bring the bar down, it's okay just to drill a new hole here in the side and make it custom fit for that gas can. The other nice thing about this is it's going to be really easy to install. Whether you're doing it on the bottom, mounting on the bottom, or mounting from the side, it's going to be just as easy either way. Check out how we did it on this trailer today. Before we install this on our trailer, we want to make sure that you find the right spot for it, where you want to put it. Another thing that we had to do was on the bottom, You can see it there, we had to drill out some of the holes. They weren't big enough for the hardware it came with, So we just took our drill and widened out tho