1965 Mustang fan / shroud install

Documenting the installation of a new 17" 6 bladed radiator fan and 3.5" fan shroud from NPD on my 1965 Mustang Convertible 289 with aftermarket AC, PS, PB.

Was able to do it without pulling the radiator, although it was tricky.

Fan:
https://www.npdlink.com/store/product...

Shroud ( I don't think I would recommend this shroud, due to the large gapsthat are molded into the top and bottom of it. I have seen other "extra cooling" shrouds that do not have these gaps)
https://www.npdlink.com/store/product...

Mounts that required drilling to enlarge the bolt hole:
https://www.npdlink.com/store/product...

Spacers:
https://www.npdlink.com/store/product...
https://www.npdlink.com/store/product...
https://www.npdlink.com/store/product...