DigUno Troubleshooting - Things to check if your WLED controller isn't working

If your Digboard doesn’t seem to be working here are some things to check:
Jumpers:
Make sure the 12v/5v jumper is in the right place
You are responsible for making sure the voltage jumper is in the right place. If you blow it, we can't replace it.
Make sure the Data pin selector jumper is in the right place (diguno only)
Wiring:
Make sure you’re data wire is connected to the correct terminal on the board
Make sure you’re connected to the “Data In” side of the LED strip
Check that the fuse has not blown
Is the Blue LED ON?
If NOT then remove the D1mini (or mini32) and connect it to a USB power source
Does the LED light up now?
If it does then there may be a problem with the Voltage Regulator on the Dig board.
If you have a voltmeter, power the Dig board and check the voltages at the Voltage Regulator pins.
If you aren’t getting 12v then check your PS voltage
If it isn’t 12v you have a bad PS.
If you have 12v at the Regulator then check the 5v pin
If you have 5v there then the Regulator is good
If you do NOT get 5v then the Regulator is bad
Submit a request for replacement
If the LED does NOT come on then connect the D1mini/mini32 to your PC and attempt to reflash it with WLED.
ESP8266 version for D1mini
ESP32_LEDpin16 for the mini32
Was the reflash successful? Is the Blue LED on now?
If it IS on now, reconnect it to the Dig board. It should be fixed
If the reflash was NOT successful and the BlueLED is NOT coming on, then it is likely a bad D1mini/ESP32
Submit a request for replacement
If the Blue LED is ON but there’s no output to the LEDs:
You can check the Level-shifter by removing the Data pin Jumper and connecting a wire from the 2 pin to the Data in pin on the LEDs.
If that makes the LEDs work then the level shifter is bad
Submit a request for replacement
LED1 is the only pin that will give output unless you use a modified version of WLED.

( If any of these links don't work, look here: https://drzzs.com/products/ or https://www.amazon.com/shop/drzzs )

IMPORTANT LINKS:
https://drZzs.com
#DrZzs

Discord help from the Pixelheads:   / discord  
#wLED Discord:   / discord  
#wLED WIKI: https://kno.wled.ge/

LED Troubleshooting Flowchart: https://drzzs.com/wp-content/uploads/...

LED Flicker Troubleshooting Flowchart: https://drzzs.com/wp-content/uploads/...

US get #QuinLED #DigUno board here: https://drzzs.com/shop/dig-uno/
International here: https://quinled.info/pre-assembled-qu...

US get QuinLED #DigQuad board here: https://drzzs.com/shop/digquad/
International customers here: https://quinled.info/pre-assembled-qu...

#PermaTrack Community Page:   / discord  
Buy PermaTrack: https://www.permatrack.us/shop/permat...

DrZzs Store: https://www.drzzs.com/shop
DrZzs Favorite Things List: https://drzzs.com/products/
DrZzs Amazon Page: https://www.amazon.com/shop/drzzs

Social Media:
Discord DrZzs - https://discord.me/drzzs
#DrZzs Facebook Page: https://fb.me/DrZzs
Message: https://m.me/DrZzs
Group:   / 1969622823351838  
Discord Home Assistant -   / discord  
Twitter:   / dr_zzs  
Instagram:   / drzzs  

Dancing Squirrels 3D Animations Courtesy 3ATIVE Studios https://www.3ative.com/

Music:Happy Rock Licensed from:
https://www.bensound.com/royalty-free...
Music:Jazzy Frenchy Licensed from:
https://www.bensound.com/royalty-free...

DrZzs may be compensated if using some of the links provided.
Powered by Restream https://restre.am/yt