Ducati Multistrada 950 V2S Rear Wheel Change and Chain Adjustment

Ducati Multistrada 950 V2S rear wheel removal and refitting plus Chain Adjustment

NOTE: I've reduced to torque setting to 190Nm on advice...



00:00 - Start
00:14 - Intro
00:35 - Disclaimer
01:10 - Tools Required
01:36 - 36mm Wheel Nut
01:54 - Remove 36mm Nut
02:37 - Remove Axle Bolt
03:04 - Drop the Wheel Out
03:29 - Protect Sensor ring
03:42 - Brake Caliper
03:50 - ReFitting
04:20 - Push pads back
04:29 - Slide wheel in to place
05:01 - Insert Axle Bolt
05:43 - Loosely put nut back on
06:21 - Find Chain Tight Spot
07:29 - Chain Adjustment
09:20 - minor adjustments
10:18 - Tighten Up
11:45 - Recheck everything!
12:13 - Final Torque up
13:50 - Outro


DISCLAIMER
I am not a professional and as such will not be responsible for property damage or injury incurred as a result of any of the information contained in these videos. They are to give information only and carried out with the best of my limited ability.
Also, information given in these videos does not guarantee the desired outcome.
Always refer to the vehicle handbook and/or service manual for specific settings and procedures for your own vehicle.