Injector Flow Rate Maxed Out at 63lbs/hr: How to Fix Hard Limit Using HP Tuners 3.X Software

How to input your injector Flow Rate when your table is maxed out at 63lbs /hr.
This short video will show you how to fix this issue.

0:27 Common problem on early E38 computers
0:35 2006 Corvette, 2004-2006 GTO's
1:00 Stock injectors usually are this size
1:30 Solution for when that table is maxed out
1:44 LS2 vehicle plus a few LS7's depending on year
2:20 Engine-Fuel-General
2:30 Flow Rate vs KPA VAC
2:38 Make sure you have a good set of injectors that come with data like infinity injectors
3:00 Set entire table to maximum limit
3:20 0-63lbs/hr
3:30 But we have 90lb/hr injectors?
4:00 We now have a multiplier
4:27 Open flow rate modifier vs Battery Voltage
5:30 this works all the up to any known injector value of 2X stock table
5:44 This method works Most of the time...

For more High-Performance Tuning Knowledge #HPTK
Check out our website: http://thetuningschool.com/newtuners/

Be sure to follow us on
Facebook:   / thetuningschool  
Instagram:   / thetuningschool