[HINDI] Steering Basics : Camber | Caster | Toe-in | Toe-Out | KPI | SAI | Animation!

Namaskar Dosto aj hum is video me bat karenge Steering Basics ke bare mai!!

aj is video mai hum 4 cheez dekhenge!

1. Caster angle kya hai?
2. Camber Angle kya hai?
3. Toe in aur toe out kya hai?
4. King Pin inclination aur Steering Axis Inclination kya hota hai?


Camber angle: Camber angle is the angle made by the wheels of a vehicle; specifically, it is the angle between the vertical axis of the wheels used for steering and the vertical axis of the vehicle when viewed from the front or rear. It is used in the design of steering and suspension.

Caster Angle: The caster angle or castor angle is the angular displacement of the steering axis from the vertical axis of a steered wheel in a car, motorcycle, bicycle or other vehicle, measured in the longitudinal direction.

Toe in: a slight forward convergence of a pair of wheels so that they are closer together in front than behind.

Toe Out: a slight forward divergence of a pair of wheels so that they are closer together behind than in front.

King Pin Inclination: King pin angle, virtual or physical, is sometimes referred to as it's acronym KPA, or alternatively king pin inclination (KPI), or steering axis inclination, SAI. On most modern designs, the kingpin angle is set relative to the true vertical line, as viewed from the front or back of the vehicle.

aise hi zyada videos ko dekhne ke liye subscribe kijiye the automotive channel ko!!


#Camber #caster #Steering