Photo Vcarve on MDF with simple mahogany frame of Police Officers

Описание к видео Photo Vcarve on MDF with simple mahogany frame of Police Officers

Sorry for finally getting a video out. It cooled down where I live, which allowed me to get back into carving.

I was given a photo to make a photo vcarve of for these gentleman. I used a 60 degree vbit (DOC .07, stepover retract .09, line spacing 90%, line angle 33) for the photo vcarve. After the carving I brushed off the project then added shellac (was not shown in the video). After it dried I sprayed flat black paint & primer. For the sanding I used 220 grit while being light handed with it. The frame was basic butt joints with wood glue and finished with tung oil, enjoy!

Комментарии

Информация по комментариям в разработке