Fuel Pressure Regulator

Fuel Pressure Regulator

Testing the Fuel Pressure Regulator on the return line for a Maxximo

Production common rail fuel systems are equipped with a closed-loop high pressure control-system that stabilizes the rail pressure within a relatively small margin to the nominal value specified by the electronic control unit for a given engine operating condition. The pump maintains the rail pressure by continuously delivering fuel to the common rail. This pressure is monitored by a pressure sensor and the difference between the nominal rail pressure value and the measured one is the input signal for the controller. In control terminology, the rail pressure is the system output while the position of the actuator used to control the rail pressure is the system input.

There are a number of approaches to control the pressure in the common rail. One way is to supply more fuel than is needed to the common rail and use a high pressure regulator—commonly referred to as a pressure control valve—in the high-pressure circuit to spill the excess fuel back to the fuel tank. In this approach, the pressure control valve position is the control system input. While this approach was used exclusively in some early fuel injection systems such as those with Bosch CP1 pumps (Figure 1 and Figure 2), poor efficiency and an excessively high fuel return temperatures can result.

Another approach is to meter the fuel at the high pressure pump to ensure that only the amount of fuel required by the injectors is supplied to the common rail. A number of pump metering approaches are possible. One common approach is to meter the fuel drawn into the pump (inlet metering) with some type of inlet metering valve (IMV)—sometimes also referred to simply as a fuel metering valve (FMV). Another approach is to allow the pump to draw in an uncontrolled amount of fuel and meter the pump’s discharge flow (outlet metering) with a valve such as an outlet metering valve (OMV). Another means is to vary the effective displacement of the high pressure pump. By carefully controlling the amount of fuel entering the pump and avoiding compression of excess fuel to high pressure, the fuel injection system hydraulic efficiency can be improved and generation of excessively high fuel temperatures can be avoided. It should be noted, however, that metering the fuel at the injection pump may not avoid the need for a high pressure regulator. A pressure regulator can still be used to provide some trimming of the rail pressure.

A pressure control valve for controlling rail pressure can be located at one rail extremity or at the pump outlet . The pump-external PCV leads to lower pump manufacturing costs but the proximity of the regulator to the injectors can introduce additional disturbances in injector dynamics. In the pump-integrated PCV solution, the fuel throttled by the control valve joins the leakage flow from the pumping chambers as well as the fuel flowing in the pump’s cooling and lubrication circuits. This combined flow is discharged from the pump to return to the fuel tank.

Rail pressure control with a PCV is inherently fast because of the proximity of the system input and system output (rail pressure sensor). In other words, the system does not include the delay resulting from fuel passing through the high pressure pump as would be the case for some of the pump metering approaches.

Maxximo Common Rail
   • Maxximo Common Rail  

Disclaimer:
Due to factors beyond the control of Mechanic Sl Bro, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Mechanic Sl Bro assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Mechanic Sl Bro, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Mechanic Sl Bro.

#mahindra #maxximo #starting #problem #commonrail #pressure #regulators

Audio free download by following link.
full credit goes to
Freedom by Roa   / roa_music1031  
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/-_freedom
Music promoted by Audio Library    • Freedom – Roa (No Copyright Music)  

#mahindra #maxximo #starting #problem #obd2scanner #mahindrasupro #regulators #testing #fuel #pressure