1.6 CRDi Injector seal and valve cover gasket removal

How to replace injector and valve cover gasket in 1.6crdi KIA HYUNDAI engine D4FB

I was using this tools:

10mm wrench and10mm socket to undo electric harness

10mm socket 3/8, 1/4 to undo
valve cover

12mm socket to undo bolts of the injectors clamping piece

Needle nose pliers to remove spring clamps from te injectors fuel return line

Torque wrench

Grease to grease up injectors, ceramic grease is commonly used but i was using copper grease

Coloured covers are from hand sprayer
and white covers are from selant

Torque Tightening :
Injector clamping piece bolt 28~30Nm
Valve cover bolts:
step one 3.92 ~ 5.88Nm
step two 7.8 ~ 9.8 Nm
tighten from center to the sides

So the reason I do all this stuff in the video was valve cover gasket leak and you won't be able to take off valve cover without removing injectors and according to manual you need to replace copper washers every time you remove injectors

#KIAceed #16crdiD4FB #InjectorCopperWasher Replacement #kia ceed #hyundai
#1.6 crdi valve cover gasket #kia ceed 1.6 crdi
#injector seal
#injector seal replacement #1.6crdi valve cover gasket