Скачать или смотреть Basic Knowledge for Civil Engineering | Lapping in Beam | IS456 |

✨ 𝐁𝐚𝐬𝐢𝐜 𝐊𝐧𝐨𝐰𝐥𝐞𝐝𝐠𝐞 𝐟𝐨𝐫 𝐂𝐢𝐯𝐢𝐥 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 | 𝐍𝐨𝐭𝐞𝐬 | 𝐋𝐚𝐩𝐩𝐢𝐧𝐠 𝐢𝐧 𝐁𝐞𝐚𝐦 ✨

🌟 𝐕𝐢𝐝𝐞𝐨 𝐒𝐮𝐦𝐦𝐚𝐫𝐲:
This tutorial explains lapping in beams, why it is required, and the correct positions for lapping in tension and compression zones. Learn about lapping length as per IS codes, site practices, and common mistakes to avoid. A must-watch for civil engineers, site engineers, contractors, and students.

⏱️ 𝐓𝐢𝐦𝐞𝐬𝐭𝐚𝐦𝐩𝐬 𝐅𝐨𝐫 𝐐𝐮𝐢𝐜𝐤 𝐍𝐚𝐯𝐢𝐠𝐚𝐭𝐢𝐨𝐧:
0:00 – Introduction to Lapping in Beam
0:01 – What is Lapping?
0:02 – Lapping Length Formula (as per IS Code)
0:03 – Correct Position of Lapping in Beams
0:04 – Lapping in Tension Zone vs Compression Zone
0:05 – Practical Site Guidelines
0:06 – Key Takeaways

✅ 𝐖𝐡𝐚𝐭 𝐘𝐨𝐮’𝐥𝐥 𝐃𝐢𝐬𝐜𝐨𝐯𝐞𝐫:
🔹 Concept of lapping in beams
🔹 Standard lapping length formula (IS code)
🔹 Best practices for lapping in tension & compression zones
🔹 Site tips for error-free reinforcement placement

🔥 𝐖𝐡𝐲 𝐓𝐡𝐢𝐬 𝐌𝐚𝐭𝐭𝐞𝐫𝐬:
🌟 Ensures structural safety & strength
🌟 Prevents weak points in beams
🌟 Helps in proper load transfer & durability

📋 𝐊𝐞𝐲 𝐏𝐨𝐢𝐧𝐭𝐬 𝐈𝐧𝐜𝐥𝐮𝐝𝐞:
🔹 Lapping length = 50 × bar diameter (approx. as per IS code)
🔹 Avoid lapping at maximum bending moment regions
🔹 Prefer lapping in compression zone (where possible)
🔹 Stagger laps for better strength distribution

🔔 𝐂𝐚𝐥𝐥 𝐭𝐨 𝐀𝐜𝐭𝐢𝐨𝐧:
👉 Like
👉 Comment
👉 Subscribe

🎯 𝐊𝐞𝐲𝐰𝐨𝐫𝐝𝐬 𝐍𝐚𝐭𝐮𝐫𝐚𝐥𝐥𝐲 𝐔𝐬𝐞𝐝:
Lapping in Beam, Lapping Length in Beam, Civil Engineering Basics, IS Code for Lapping, Reinforcement Detailing, Beam Construction, Site Engineering, Structural Detailing

🎥 𝐏𝐫𝐚𝐜𝐭𝐢𝐜𝐚𝐥. 𝐒𝐢𝐭𝐞-𝐑𝐞𝐚𝐝𝐲. 𝐂𝐨𝐝𝐞-𝐁𝐚𝐬𝐞𝐝.

🎯 𝐓𝐚𝐠𝐬:
#LappingInBeam #CivilEngineering #Reinforcement #BeamConstruction #StructuralEngineering #CivilEngineeringBasics #SiteEngineering #ConstructionTips