Nami Burn-e Tyre Change Tutorial

Step 1 – deflate the tyre by removing the valve core

Step 2 – Remove the motor cable clips

Step 3 – Remove the calliper

Step 4 – Remove the wheel nuts and washer being careful to support the wheel

Step 5 – Heat the disc screws and then remove them as well as the disc

Step 6 – Break the tyre bead

Step 7 – Insert the tyre levers and use the scissor technique to remove the tyre

Step 8 – Make sure the new tyre is the right way round before fitting

Step 9 – Use tyre paste to lubricate the bead

Step 10 – Press the tyre down over the rim

Step 11 – Use the tyre leavers to ease the tyre onto the rim at one end

Step 12 - Repeat the process until the tyre is seated

Step 13 – Now replace the valve core

Step 14 – Inflate the tyre to near maximum PSI to seat the bead

Step 15 – Reduce PSI for personal preference

Step 16 – Clean up the wheel before refitting

Step 17 – Replace the disc making sure it is facing the right way

Step 18 – loctite disc screws before fixing

Step 19 – Replace the washers and slide the wheel onto the swingarms make sure it is the right way round

Step 20 – Add Loctite to both sides of the axel and torque axle bolts to manufacturers guidelines

Step 21 – Replace motor cable clips and use Loctite on the screws

Step 22 – Replace the calliper and use Loctite on the screws

Step 23 – Replace the dust cover on the valve and you are finished.