Pastfx 80/A MN3007 Flanger

he PastFx 80/A MN3007 Flanger is based upon a venerable late 70’s, early 80’s discontinued analog flanger pedal famously utilised by numerous musicians, including the likes of master guitarists Pat Travers and Paul Gilbert. It uses an obsolete high voltage Panasonic 1024 stage Bucket Brigade Device with extra features and functions all in a small Pedal Board Friendly sized enclosure.

From subtle modulation, to soaring jet woosh, to metallic clang and out-of-this-world warble, and everything in between– the 80/A MN3007 delivers a vintage-correct reimagining and expansion of the original from which it was inspired.

For more information:
http://www.pastfx.com/index.php/effec...

Middle Aged Gear Junkie Merchandise
USA and Europe https://middle-aged-gear-junkie.creat...

Australia and New Zealand https://www.redbubble.com/shop/?query...

You can join the Middle Aged Gear Junkie facebook page by clicking on the link   / 542506823163878  

Controls:
Manual - controls the fixed delay time of the effect. (When a stereo cable is inserted into the Control jack, the manual control will no longer function.)

Range - controls whether the speed control (automatic) or Manual control (fixed) controls the Delay time. FCW = 100% speed control. FCCW = Fixed (Matrix style) 12 oclock is a blend of both

Speed – controls the automatic rate of the LFO (visually displayed via Blue/Red LED)

Blend – New control which restricts the amount of modulated / wet signal mixing with the dry signal. Fully Clockwise is stock setting.(reducing the blend does not reduce the feedback)

Threshold - controls the sensitivity of the Noise Gate circuit which is determined by the intensity of the instruments attack. Fully clockwise minimises this feature. With careful CCW adjustment, the Threshold control can allow an envelope style flange occurring pending the attack and amplitude of the signal fed.

Enhance - Also known as color/feedback/regen, controls the amount of signal regenerated back into the front end of the circuit. This allows the flanger to create a more intense effect.

Level – Allows for output volume adjustment of overall effect

Harmonics switch – Blue LED = Negative Feedback (hollow tubular sound), Red LED = Positive feedback (fuller sound)

Bass Feedback Reduction Switch – Simply press the White pushbutton switch adjacent to the Level control to reduce the amount of Bass frequencies in the feedback circuit. (Tame the Boom!)

Control - expression pedal jack allowing the Manual control to be controlled externally using a 10K – 100K potentiometer.

(Ring - Pot pin 1, Sleeve - Pot pin 2, Tip - Pot pin 3)

0:00 Intro song
1:13 Pastfx 80/A Flanger
2:00 Pastfx 80/A MN3007 Flanger
2:46 Clean tone
3:07 Clean example
3:43 With delay
4:25 volume swells
4:58 chorus mode
5:45 Drive tone
6:22 with drive
6:48 melodic playing
7:30 bass cut switch
8:28 threshold control