Скачать или смотреть Arduino, ESP32, STM32, PIC and other microcontrollers on a wireless network. Lesson 2

Data transfer - easy and simple!
Lesson 2: Two-way packet exchange (strings and data structures). Monitoring the state of pins on the transmitter side and setting the state of pins on the receiver side

This video shows how easy and simple it is to transmit data in the "Easy Net Everywhere" network, to control the state of digital and analogue pins of the controller on the transmitter side and to control the state of pins on the receiver side.
Any microcontroller or computer with a UART serial port can communicate in the network. The range is up to 10 km in line-of-sight conditions.

== Links
Two-way communication range test for two nodes in the network:NRF24L01+ / NRF24L01+PA+LNA / E01-ML01DP5 / E01-2G4M27D -Transceiver test 250 Kbps, 1 Mbps, 2 Mbps
   • NRF24L01+ / NRF24L01+PA+LNA / E01-ML01DP5 ...  

Arduino, ESP32, STM32, PIC and other microcontrollers on a wireless network. Lesson 1
   • Arduino, ESP32, STM32, PIC and other micro...  

Telegram: https://t.me/EasyNetEverywhere
e-mail: [email protected]

******* Good UART terminal
Advanced Serial Port Monitor:
https://www.aggsoft.ru

00:00: Introduction
00:12: What you need to build a test module
00:26: Estimating the error of the voltage indicator
00:52: Connections
01:00: Lesson 2.1 - Executing the sketch
01:14: Listing the sketch
02:04: Flashing the controllers
02:19: Lesson 2.2 - Executing the Sketch
02:49: Listing the sketch
04:05: Lesson 2.3 - Executing the sketch
04:23: Listing the sketch
05:04: Lesson 2.4 - Executing the sketch.
05:56: Executing the sketch on the test module
07:08: Listing the sketch
08:18: Conclusion