How to Remove a Stuck Inner Race from a UTV Hub on a Polaris RZR

Removing and replacing a Polaris wheel bearing isn't always easy. Dealing with a rather stubborn bearing isn't fun either, especially a bearing race that comes out of the bearing and gets stuck. Braden is going to walk you through some techniques on how to remove a stuck bearing and show you how to press out the old bearing using SuperATV's Polaris bearing removal tool. Once that is complete, he will show you how to easily press in a new bearing and have you back up and running in no time.

If you are looking for a quick instructional video on how to use our tool, you can find it on our channel or view it here:    • How to Use SuperATV's Polaris Wheel B...  

00:04 – Tool List
00:08 – Check to see if the wheel bearing has play
00:41 – Remove tire
01:11 – Remove cotter pin
02:05 – Remove the radius arm hardware
03:38 – Remove brake caliber
03:59 – Disconnect the sway bar link
04:22 – Pull trailing arm out and rest axle on trailing arm
04:39 – Remove the hub
06:39 – Remove the race from the hub
14: 11-- Clean the hub
14:26 -- Clean around the wheel bearing
14:52 – Remove snap ring
16:00 -- Use the wheel bearing press to remove the bearing
18:37 – Clean the inner hub
19:35 – Install the new bearing using the wheel bearing press
22:00 – Reinstall the snap ring
22:26 -- Reinstall axle
22:32 – Reinstall hub
22:55 -- Reinstall break caliber
23:39 – Reinstall radius arms
24:17 – Reinstall sway bar link hardware
24:30 – Fully tighten sway bar link hardware
23:38 – Fully tighten radius arm hardware
24:54 – Fully tighten castle nut
25:01 – Attach new cotter pin
25:28 – Reinstall the wheel and tire

Need a SuperATV Polaris Wheel Bearing Removal Tool? Visit our website...
https://www.superatv.com/polaris-whee...