Скачать или смотреть Application Steps - Litokol Aquamaster EVO + Litoband SK Net

AQUAMASTER EVO WATERPROOFING MEMBRANE
Aquamaster EVO is a ready-to-use, solvent-free, reinforced liquid membrane made from synthetic resins in aqueous
dispersion, used for the waterproofing of indoor and outdoor wet areas. Does not require reinforcing mesh or fabric
and sealing bands to protect the corners and edges of the waterproofing system. It can be applied on top of nonabsorbent
materials, such as existing ceramic and porcelain tiles.

ADVANTAGES / FEATURES
• Product exhibits very low volatile organic compound emissions (VOC). Complies with the most stringent Global Air
Quality Regulations.
• Single component ready-to-use product that does not require any preparation
• Unlike other waterproofing membranes, it does not require reinforcing mesh or fabric and sealing bands for the
protection of corners, making installation faster and more affordable
• Applicable with smooth steel trowel, roller or brush
• Reusable product. Any leftover material, if stored tightly sealed in the original packaging at temperatures between
41°F (+5°C) and 95°F (+35°C), can be reused even after months have passed, thus avoiding wastage
• The fast drying time allows the application of multiple coats just a short time apart, making it possible to complete
waterproofing in only one day
• Coverings can be installed just 24 hours after the application of the last coat with cementitious adhesives in class
C2 or reactive adhesives in class R2 according to EN 12004
• Product exempt from transport restrictions via road, sea, air and rail
• Fiber-reinforced for maximum elasticity and strength even at low temperatures

DIRECTIONS
Apply the product directly onto the substrate using a smooth steel trowel, roller or brush. Apply two/three consecutive coats so that the final thickness of the dried material is at least 1/20"-1/16" (0.8-1 mm). In the case of substrates that are not perfectly smooth such as screeds and cementitious leveling layers or those created with Litoplan Smart, and lightweight panels finished with a reinforced cementitious leveling layer, apply the first coat of product with a roller or brush, diluted with 10% water, making sure it properly penetrates the substrate. This will close the surface pores of the substrate, thus preventing the emergence of bubbles when the subsequent coats are applied. After the drying time (approx. 30 minutes at a temperature of 73.4°F (+23°C)), apply the subsequent coats of undiluted product. The open time between the second and third coat is approximately 4 hours at a temperature of 73.4°F (+23°C). Use utmost caution when applying the product in edges and corners, making sure not to leave any excess material that may cause cracking during the drying phase. In the presence of pipework, drains, spotlights, etc., lay the special Litoband SK Pipes Collar and Litoband SK Self-Adhesive Drains Collar pieces. Alternatively: For the sealing of pipework and through-elements in general with irregular sizes and/or shapes, create a connecting bead between the element and the waterproof membrane with the ready-to-use adhesive grout Litosil MS. For correct use of the products to be used, always refer to the respective technical data sheets.

LITOBAND SK NET
Litoband SK Net is a breathable tape with double layer of alkali-resistant polypropylene fabric.

FEATURES
Micropore reinforcing band
• Certified according to ETAG 022 - part 1 together with Aquamaster EVO for waterproofing of indoor wet areas
• Ideal for the development of junctions and connections in SpazioContinuo decorative systems.

DIRECTIONS
Litoband SK Net is used in combination with the Aquamaster EVO waterproofing membrane for sealing joints in indoor wet areas between panels in gypsum, fiber cement, wood, etc., as a reinforcing element. Apply the waterproofing membrane on the junctions between the panels in the area that needs to be waterproofed, creating a thickness of at least 1/16" (1 mm); then apply the Litoband SK Net sealing tape, pressing firmly with a trowel to prevent the formation of air bubbles or folds. Make sure that the waterproofing membrane has not formed a film on the surface preventing the tape's adhesion. In this case, the waterproofing membrane must completely cover the tape.